Influence of wavelength on the parameterization of drag coefficient and surface roughness     

Paul A. Hwang 《Journal of Oceanography》2004,60(5):835-841

Surface waves are the roughness element of the ocean surface, the air-sea interaction processes are influenced by the wave conditions. The dynamic influence of surface waves decays exponentially with distance from the air-water interface. The relevant length scale characterizing the decay rate is the wavelength. The parameterization of drag coefficient and surface roughness can be significantly improved by using wavelength as the reference length scale of atmospheric measurements. The wavelength scaling of drag coefficient and dynamic roughness also receives support from theoretical studies of wind and wave coupling.  相似文献   

Parameterization of iron and manganese cycling in the Black Sea suboxic and anoxic environment     

Sergey Konovalov  Anatoliy Samodurov  Temel Oguz  Leonid Ivanov 《Deep Sea Research Part I: Oceanographic Research Papers》2004,51(12):273

New and published data on the distribution and speciation of manganese and iron in seawater are analyzed to identify and parameterize major biogeochemical processes of their cycling within the suboxic (15.6σ_t16.2) and anoxic layers (σ_t16.2) of the Black Sea. A steady-state transport-reaction model is applied to reveal layering and parameterize kinetics of redox and dissolution/precipitation processes. Previously published data on speciation of these elements in seawater are used to specify the nature of the transformations. Two particulate species of iron (Fe(III) hydroxide and Fe(II) sulfide) are necessary to adequately parameterize the vertical profile of suspended iron, while three particulate species (hydrous Mn(IV) oxide, Mn(II) sulfide, and Mn(II) carbonate) are necessary to describe the profile of suspended manganese. In addition to such processes as mixing and advection, precipitation, sinking, and dissolution of manganese carbonate are found to be essential in maintaining the observed vertical distribution of dissolved Mn(II). These results are used to interpret the observed difference in the form of vertical distribution for dissolved Mn(II) and Fe(II). Redox transformations of iron and manganese are coupled via oxidation of dissolved iron by sinking suspended manganese at σ_t16.2±0.2 kg m⁻³. The particulate manganese, necessary for this reaction, is supplied through oxidation of dissolved Mn(II). The best agreement with observations is achieved when nitrate, rather than oxygen, is set to oxidize dissolved Mn(II) in the lower part of the suboxic layer (15.90σ_t16.2). The results support the idea that, after sulfides of these metals are formed, they sink with particulate organic matter. The sinking rates of the particles and specific rates of individual redox and dissolved-particulate transformations have been estimated by fitting the vertical profile of the net rate.  相似文献   

Comparison of overflow simulations on different vertical grids using the Finite Element Ocean circulation Model   总被引：1，自引：0，他引：1  

Q. Wang  S. Danilov  J. Schrter 《Ocean Modelling》2008,20(4):313-335

The Finite Element Ocean circulation Model (FEOM) is applied to study the sensitivity of density driven overflows to the vertical discretization and bottom topography representation using the dynamics of overflow mixing and entrainment (DOME) setup. FEOM allows for hybrid grids combining σ, z + σ, full cell, partly shaved cell and fully shaved cell grids within the same numerical kernel thus isolating as far as possible effects of mesh geometry from those of model numerics. The sensitivity of diapycnal mixing, entrainment, plume thickness and plume meridional distribution to vertical discretization and partly to the subgrid process parameterization is explored. It is shown that simulations on pure σ grids or the combination of z + σ resolve the overflow processes best in terms of downslope plume propagation, plume thickness and dilution, and also have the least resolution dependence. Grids using z-levels generate excessive spurious mixing when resolution is insufficient. Applying partial cells improves the plume representation, but still requires higher horizontal and vertical resolution to converge to the σ grid results. It is demonstrated that increasing lateral viscosity causes the plume thickness to reduce whereas increasing lateral diffusivity has opposite effect. When keeping the Prandtl number constant, the increase in diffusivity and viscosity leads to an increase in mixing and plume thickness on z-level grids and also on σ-grids when lateral dissipation is oriented along geopotential surfaces. Using the along σ- diffusion helped to obtain correct plume thickness and entrainment on σ grids. Increasing the vertical mixing coefficients leads to an increase in diapycnal mixing and in downslope penetration as well.  相似文献   

Sensitivity of the Simulated Tropical Intraseasonal Oscillation to Cumulus Parameterizations          下载免费PDF全文

JIA Xiaolong  LI Chongyin 《Acta Meteorologica Sinica》2008,22(3):257-276

The sensitivity of the simulated tropical intraseasonal oscillation or MJO （Madden and Julian oscillation） to different cumulus parameterizations is studied by using an atmospheric general circulation model （GCM）--SAMIL （Spectral Atmospheric Model of IAP LASG）. Results show that performance of the model in simulating the MJO alters widely when using two different cumulus parameterization schemes-the moist convective adjustment scheme （MCA） and the Zhang-McFarlane （ZM） scheme. MJO simulated by the MCA scheme was found to be more realistic than that simulated by the ZM scheme. MJO produced by the ZM scheme is too weak and shows little propagation characteristics. Weak moisture convergence at low levels simulated by the ZM scheme is not enough to maintain the structure and the eastward propagation of the oscillation. These two cumulus schemes produced different vertical structures of the heating profile. The heating profile produced by the ZM scheme is nearly uniform with height and the heating is too weak compared to that produced by the MCA, which maybe contributes greatly to the failure of simulating a reasonable MJO. Comparing the simulated MJO by these two schemes indicate that the MJO simulated by the GCM is highly sensitive to cumulus parameterizations implanted in. The diabatic heating profile plays an important role in the performance of the GCM. Three sensitivity experiments with different heating profiles are designed in which modified heating profiles peak respectively in the upper troposphere （UH）, middle troposphere （MH）, and lower troposphere （LH）. Both the LH run and the MH run produce eastward propagating signals on the intraseasonal timescale, while it is interesting that the intraseasonal timescale signals produced by the UH run propagate westward. It indicates that a realistic intraseasonal oscillation is more prone to be excited when the maximum heating concentrates in the middle-low levels, especially in the middle levels, while westward propagating disturbances  相似文献   

面向四维变分资料同化的NSAS积云深对流参数化方案的简化及线性化研究     

龚建东  刘永柱  张林 《气象学报》2019,77(4):595-616

GRAPES全球四维变分资料同化系统需要积云深对流参数化方案的线性化与伴随方案,直接采用原始复杂参数化方案进行线性化并不可行,需要发展简化光滑方案来减缓非线性与非连续性特征。GRAPES全球模式采用NSAS积云对流参数化方案,积云深对流对环境的反馈主要通过补偿下沉来实现,研究突出补偿下沉作用,忽略降水蒸发、动量反馈等贡献,形成简化方案。采用输入温、湿度廓线加入不同幅度小扰动方法,评估参数化方案计算的温度、比湿时间倾向对输入扰动的敏感性,检验非线性与非连续特征。提出避免或减缓非连续“开关”的方法,在简化方案的基础上发展了简化光滑方案。简化光滑方案与原始积云深对流方案相比,在对流触发上一致,在对流的位温与比湿倾向、降水的时序模拟等方面相似,而在减缓非线性、避免非连续性方面显著优于原始方案。基于简化光滑方案发展的线性化方案表明,对小于2倍分析增量幅度的扰动,线性化方案可以较好地模拟非线性方案的扰动发展。发展的简化光滑方案具有合理性和实用性。   相似文献   

陆面过程参数化对宁波地区雷暴过程模拟的影响          下载免费PDF全文

汪雅  苗峻峰  谈哲敏 《大气科学学报》2015,38(3):299-309

利用耦合复杂程度不同的陆面过程参数化方案(Noah、RUC)的新一代中尺度数值模式WRF,对2006年6月24日发生在宁波地区的一次典型的雷暴过程进行了数值模拟试验。结果表明:对于雷暴发生前期近地面热力、动力场的特征,Noah方案的模拟较为逼真,RUC方案没有反映出下垫面覆盖的多样性以及城市下垫面的影响,城乡之间差异不明显;Noah方案模拟的雷暴启动、发展过程与观测较为一致,RUC方案较好地描述出了演变过程中的关键阶段(3次合并过程);由于参数化所考虑的要素和物理过程存在一定差异,Noah方案在对降水的强度、降水中心位置的模拟方面具有一定优势;雷暴的持续时间对陆面过程参数化方案的选择比较敏感,两个方案所模拟的雷暴过程持续时间不同程度地长于实际雷暴持续时间;无论是哪种下垫面覆盖类型,白天Noah方案模拟的感热通量均大于RUC方案,而Noah方案模拟的潜热通量均小于RUC方案。  相似文献   

中尺度涡旋混合参数空间变化对物理场以及CFC-11模拟的影响     

刘波  李阳春  徐永福  范广洲 《大气科学》2015,39(6):1149-1164

本文选用中国科学院大气物理研究所全球海洋模式(LICOM),对中尺度涡旋参数化方案(GM90方案)中等密度扩散系数和等密度面厚度扩散系数(统称为涡旋扩散系数A_ρ)对物理场及CFC-11(一氟三氯甲烷)分布的影响进行了研究。本文做了两个试验,即涡旋扩散系数采用常系数方式(对照试验)和采用在非绝热层以下A_ρ随海洋浮力频率垂直变化的参数化方案(浮力试验)。模拟结果表明,依浮力频率垂直变化的方案对模式物理场的模拟能力有一定程度的提升,如南极绕极流的输送强度比常系数方案增大了约20%~30%,与观测事实更接近;浮力试验对对照试验中过强的南极中层水有一定的削弱作用,使得模式对南大洋高纬次表层位密度的模拟有一定的改善。稍有不足的是,浮力试验对南极底层水也有一定的削弱,使得2000~3000 m深度位密度模拟较常系数方案偏低。通过对CFC-11分布、存储以及输送的研究发现,次网格参数取值的不同对南大洋CFC-11模拟情况有较大影响。浮力试验加大了南北高纬CFC-11海表的吸收通量,对南极大陆周边海域向南大洋主储藏区(34°S~60°S)的CFC-11输送能力有一定的增强,使得南大洋对CFC-11储藏量增大,大部分海区与观测资料更接近。通过CFC-11断面分析,浮力试验对南大洋上层海洋位密度模拟的改善使得CFC-11垂直结构与观测更接近。  相似文献   

非均匀地表陆面过程参数化研究   总被引：7，自引：4，他引：3  

陈斌  丁裕国  刘晶淼  张耀存 《高原气象》2008,27(5)

地表固有的非均匀性影响近地层大气的垂直结构,甚至改变局地天气条件,亦使得大气数值模式大尺度网格面积水热通量的计算对其具有较强的敏感性。为了提高气候模式性能,非均匀陆面过程参数化已是当前大气边界层和陆面过程模式研究的热点和难点问题之一。本文在调研国内外大量文献的基础上,综述了近年来非均匀地表陆面过程参数化的研究现状,分析和比较了不同的参数化方法的优缺点以及数值模式模拟结果对它们的响应,提出了目前尚待继续探讨和解决的几个关键性问题。  相似文献   

当前对流参数化研究存在问题的讨论   总被引：2，自引：0，他引：2  

左瑞亭  王丽琼  钱贞成  侯志明 《热带气象学报》2008,24(6):732-736

基于对流参数化的发展过程,讨论了当前对流参数化方案中存在的问题,着重分析了大尺度水汽辐合型和质量通量型方案的缺陷,同时对东亚季风区和我国的研究现状进行了分析,提出了通用对流参数化方案的设计思想和应该考虑的原则,具有重要的参考借鉴意义。  相似文献   

台风“云娜”在近海强度变化及结构特征的数值研究Ⅰ:云微物理参数化对云结构及降水特征的影响   总被引：2，自引：1，他引：1  

程锐  宇如聪  傅云飞  徐幼平 《气象学报》2009,67(5):764-776

首先对AREM模式模拟的台风基本结构和云结构进行验证,检验了模拟结果的可靠性.在此基础上,设计了5组试验来研究云微物理参数化方案对台风"云娜"云结构及降水特征的影响.试验设计主要突出冰相云微物理过程、云微物理特征引发的冷却效应以及霰下落速度的重要性.结果表明:云微物理参数化过程对云的发展和降水特征的影响更为显著.各试验的水凝物分布和强度不同,降水类型和强度存在较大差异,由此引起的云中热力结构也有较大区别;在所有试验方案中,24 h降水率最大差异为52.5 mm/h.云微物理过程对云和降水特征的具体影响表现在:(1)如果不考虑雨水蒸发冷却效应,此时台风内核上升运动强度最强(达到-19 Pa/s),雨水和霰粒子增长最明显,相对于对照试验增量分别为1.8和2.5 g/kg.(2)霰和雪的融化对于螺旋雨带中雨滴的增长十分重要,但他们可能不是云墙中雨水形成的主导因子.(3)不同方案的降水模拟特征也存在较大差别,采用暖云参数化后,降水区域最小,但其中对流降水比例最大(63.19%);霰落速减半后,降水区域最大,其中非对流降水比例也最大(51.15%).  相似文献